Everything else
Square-post book light clamp
- Bounding box
- 150.0 × 90.0 × 121.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
schon näher, aber mache den unteren teil, also 1 und 2 länglicher, und mache, das die verbindung zwischen 2 und 3 nicht auds 2 rauskommt, sondern das alles wie ein 4 erck von der seite außsieht, also es einfachh weiterläuft, oder zumindestens so ähnlich, und jetzt mache, das 3 von sehr kleinen leichten magneten zsuammen gehalten wird, und aus 3 ein licht rauskommt
Parameters
| Name | Value | Range |
|---|---|---|
| Cover clamp width | 90 mm | 30 – 200 |
| Lower plates length | 140 mm | 60 – 300 |
| Lower plate thickness | 3 mm | 1 – 10 |
| Gap between cover plates | 10 mm | 3 – 50 |
| Spring band thickness | 8 mm | 4 – 20 |
| Spring band width | 30 mm | 10 – 80 |
| Grip pad thickness | 1.5 mm | 0.5 – 5 |
| Corner radius | 4 mm | 0.5 – 15 |
| Post total height | 100 mm | 40 – 220 |
| Fixed lower post height | 70 mm | 30 – 180 |
| Square post side | 12 mm | 6 – 30 |
| Collar width/depth | 18 mm | 10 – 40 |
| Collar height | 16 mm | 5 – 40 |
| Hinge block side | 10 mm | 4 – 30 |
| Hinge block width | 32 mm | 10 – 80 |
| Page arm length | 130 mm | 50 – 280 |
| Page arm tilt angle | 0 deg | -45 – 45 |
| Page arm width | 36 mm | 12 – 100 |
| Page arm thickness | 4 mm | 1 – 12 |
| LED housing height | 5 mm | 1 – 15 |
| LED housing width | 12 mm | 3 – 40 |
| LED housing length | 35 mm | 4 – 100 |
| Light lens diameter | 6 mm | 3 – 20 |
| Light lens length | 3 mm | 1 – 15 |
| Magnet diameter | 4 mm | 2 – 12 |
| Magnet thickness | 1.5 mm | 0.5 – 5 |
| Battery module height | 12 mm | 5 – 30 |
| Battery module length | 45 mm | 15 – 100 |
| Battery module width | 25 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm