Everything else
Spur gear with load simulation
- Bounding box
- 300 × 300 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
tạo một lực F = 1000N phân bố đều trên bề mặt vầ mô phỏng ứng xuất biến dạng bề mặt của chi tiết
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module | 2 mm | 1 – 5 |
| Outside diameter | 300 mm | 50 – 400 |
| Gear thickness | 12 mm | 4 – 30 |
| Shaft bore diameter | 20 mm | 3 – 80 |
| Number of lightening holes | 6 mm | 3 – 12 |
| Lightening hole diameter | 35 mm | 5 – 100 |
| Lightening hole pitch radius | 95 mm | 20 – 140 |
| Applied force F (N) | 1000 mm | 100 – 5000 |
| Number of load arrows | 6 mm | 1 – 12 |
| Pitch radius of load arrows | 60 mm | 20 – 140 |
| Arrow height at 1000N | 20 mm | 5 – 50 |
| Arrow shaft diameter | 4 mm | 1 – 10 |
| Arrow head diameter | 8 mm | 2 – 20 |
| Load ring thickness | 3 mm | 1 – 6 |
| Load ring radial width | 10 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm