Everything else
Spur Gear with Hub and Cross Pin Hole
- Bounding box
- 44.0 × 44.0 × 22.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
i dont want pin holes to be in the toothed portion
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 2 mm | 0.5 – 6 |
| Number of Teeth | 20 teeth | 10 – 60 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Face Width | 10 mm | 3 – 40 |
| Bore Diameter | 6 mm | 0 – 30 |
| Hub Diameter | 20 mm | 10 – 60 |
| Hub Length | 12 mm | 4 – 40 |
| Pin Hole Diameter | 4 mm | 1 – 10 |
| Pin Hole Offset Above Tooth Band | 4 mm | 0 – 20 |
| Pin Hole Wall Margin | 2 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm