Loading the interactive model…
Interactive 3D model of Spur Gear with D-Bore and Radial Setscrew HoleGears and transmission
Spur Gear with D-Bore and Radial Setscrew Hole
30 views
- Bounding box
- 50.0 × 28.1 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
Full 360 degree involute spur gear Module 1 mm Teeth Count 48 Pressure Angle 20 deg Face Width 10 mm D-shaped center shaft hole, 8.2 mm diameter, 7.2 mm flat height Add a radial M4 setscrew hole (3.4 mm diameter) through the hub aligned with the flat face of the D-bore
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 1 mm | 0.3 – 10 |
| Teeth Count | 48 | 10 – 200 |
| Pressure Angle | 20 deg | 14.5 – 30 |
| Face Width | 10 mm | 2 – 50 |
| Bore Diameter | 8.2 mm | 1 – 40 |
| Flat-to-Curve Height | 7.2 mm | 0.5 – 20 |
| Setscrew Hole Diameter | 3.4 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS