Gears and transmission
Spur Gear M0.8 Z10
- Bounding box
- 9.6 × 9.3 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- September 19, 2026
Download
Free to download and use. See the terms.
The prompt
Design a spur gear with: - Module: 0.8mm - Number of teeth: 10 - Pressure angle: 20 degrees - Bore diameter: 3.17mm - Thickness: 5mm - Material: PLA for 3D printing - Output: STEP file
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 0.8 mm | 0.3 – 3 |
| Number of Teeth | 10 teeth | 6 – 60 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Face Width / Thickness | 5 mm | 1 – 20 |
| Bore Diameter | 3.17 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled