Gears and transmission
Spur Gear
- Bounding box
- 32.0 × 31.9 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
A spur gear with 30 teeth, module is 1, width of the gear is 5mm, bore diameter is 4 mm, and pressure angle is 20.
Parameters
| Name | Value | Range |
|---|---|---|
| Number of Teeth | 30 | 8 – 200 |
| Module | 1 mm | 0.5 – 10 |
| Pressure Angle | 20 ° | 14.5 – 30 |
| Helix Angle | 0 ° | 0 – 45 |
| Backlash | 0 mm | 0 – 0.5 |
| Face Width | 5 mm | 2 – 50 |
| Bore Diameter | 4 mm | 1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled
Assembled 2WD Sumo Robot
Design a compact, aggressive 2-wheel-drive competition SUMO ROBOT. Main chassis: 260×200×6 mm plywood. 2 STD D-shaft gear motors. 2 wheels: Ø50×20 mm. Controller board: 100×60 mm.