Gears and transmission
Sprocket
- Bounding box
- 122.0 × 122.0 × 2.2 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
a sprocket with a tooth pitch of 4.7 mm , an inner shaft size of 8 mm, an outer diameter of 122mm, the thickness of the teeth is 2.2mm, teeth to taper to 1,5mm
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 122 mm | 20 – 500 |
| Tooth Pitch | 4.7 mm | 1 – 20 |
| Shaft Bore Diameter | 8 mm | 1 – 100 |
| Tooth Thickness (Z / Face Width) | 2.2 mm | 0.5 – 20 |
| Root Diameter | 118.7 mm | 10 – 400 |
| Tooth Base Width | 2.2 mm | 0.5 – 20 |
| Tooth Tip Thickness | 1.5 mm | 0.1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled