Gears and transmission
Spool Assembly with Bottom Gear
- Bounding box
- 60.0 × 60.0 × 45.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
put the gear at the bottom so it attaches to the square base
Parameters
| Name | Value | Range |
|---|---|---|
| Base Side Length | 60 mm | 20 – 150 |
| Base Thickness | 5 mm | 2 – 20 |
| Inner Cylinder OD | 30 mm | 10 – 80 |
| Inner Cylinder Bore | 10 mm | 4 – 40 |
| Cylinder Height | 40 mm | 10 – 120 |
| Outer Sleeve OD | 50 mm | 20 – 120 |
| Radial Clearance (inner to outer) | 10 mm | 0.5 – 20 |
| Outer Slot Width | 6 mm | 1 – 30 |
| Anchor Slot Width | 4 mm | 1 – 20 |
| Anchor Slot Height | 8 mm | 1 – 30 |
| Anchor Slot Depth | 3 mm | 0.5 – 10 |
| Anchor Slot Z Position | 5 mm | 0 – 40 |
| Gear Module | 2 mm | 0.5 – 5 |
| Gear Teeth | 20 | 8 – 80 |
| Pressure Angle (°) | 20 ° | 14.5 – 25 |
| Gear Face Width | 10 mm | 2 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled