72.890.126.9
Loading the interactive model…
Interactive 3D model of Split-star double door handles (faceted, rounded tips)

Everything else

Split-star double door handles (faceted, rounded tips)

1 views
Bounding box
90.1 × 72.8 × 26.9 mm
Engine
3D Printing B-rep
Parameters
12
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Matching door handles each with a single attachment point, that together make a star, colour #FFF030, long thin pins, irregular (not 5-sided), cornery star with sharp inner corners, tips rounded so they are not sharp enough to injure

Parameters

NameValueRange
Longest pin length from centre60 mm40 – 200
Inner corner radius, smaller = thinner pins14 mm8 – 25
Pin tip rounding radius2 mm0.5 – 5
Thickness at the outline4 mm2 – 10
Extra height of centre ridge peak, 0 = flat3 mm0 – 10
Gap between the two doors4 mm0 – 20
Finger clearance behind star20 mm12 – 45
Mounting post diameter11 mm9 – 24
Post base flare1.5 mm0 – 6
Hole for M4 heat-set insert5.6 mm3 – 8
Insert hole depth8 mm5 – 18
Optional anti-rotation pin length, 0 = off0 mm0 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Split-star double door handles (faceted, rounded tips) - Free CAD Model (STEP, STL) | TextoCAD