Brackets and mounts
Split Picture-Frame Half with M3 ZipBolt Clamp Pockets
- Bounding box
- 200.0 × 70.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
that is wrong. go back to the previous image when you split the frame as you have changed all the dimensions. you were only supposed to add a way of joining the two halves together (note that this is only 1 half as we have split it down the middle) to make the original frame but by adding a way to clamp the side together with an m3 nut and bolt inserted into a cut out from the inside of the frame,
Parameters
| Name | Value | Range |
|---|---|---|
| Window Opening Width | 160 mm | 40 – 400 |
| Window Opening Height | 100 mm | 40 – 400 |
| Moulding Face Width | 20 mm | 8 – 60 |
| Front Lip Depth | 8 mm | 3 – 20 |
| Rabbet Depth | 10 mm | 2 – 40 |
| Split Fraction Kept | 0.5 ratio | 0.3 – 0.7 |
| M3 Clearance Hole Diameter | 3.2 mm | 2.5 – 5 |
| M3 Nut Pocket Diameter | 5.6 mm | 4.5 – 8 |
| M3 Nut Pocket Depth | 3.5 mm | 1.5 – 8 |
| M3 Bolt Hole Depth | 10 mm | 5 – 30 |
| Clamp Offset from Split Line | 6 mm | 2 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent