Gears and transmission
Split Bat Twin Gear Stand
- Bounding box
- 120.0 × 40.0 × 106.5 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
The gears are interlocking with each other and the bat is also split in half. Add legs and feet to the bat so it is standing on top of the gears.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 60 mm | 20 – 120 |
| Base Width | 40 mm | 20 – 100 |
| Base Height | 10 mm | 5 – 30 |
| Plaque Pocket Width | 30 mm | 10 – 50 |
| Plaque Pocket Height | 5 mm | 2 – 15 |
| Plaque Pocket Depth | 5 mm | 1 – 10 |
| Gear Module | 2 mm | 0.5 – 5 |
| Gear Teeth | 20 | 5 – 100 |
| Gear Face Width | 10 mm | 5 – 30 |
| Gear Bore | 6 mm | 2 – 20 |
| Center Distance Extra Clearance | 0 mm | -0.5 – 2 |
| Bat Half Span | 60 mm | 20 – 150 |
| Bat Body Height | 30 mm | 10 – 80 |
| Bat Thickness | 8 mm | 4 – 20 |
| Leg Embed Into Bat | 5 mm | 1 – 15 |
| Split Gap Width | 4 mm | 1 – 20 |
| Wing Scallops | 5 | 1 – 20 |
| Wing Scallop Depth | 4 mm | 0 – 15 |
| Ear Height | 10 mm | 2 – 30 |
| Body Width | 50 mm | 10 – 120 |
| Leg Diameter | 5 mm | 2 – 20 |
| Foot Diameter | 12 mm | 5 – 40 |
| Foot Height | 3 mm | 1 – 10 |
| Leg Height | 20 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled