Splined Crown Mount

1 views

Bounding box: 120 × 120 × 80 mm
Engine: 3D Printing B-rep
Parameters: 23
Published: November 3, 2026

Download

Free to download and use. See the terms.

The prompt

faz

Parameters

Name	Value	Range
Base plate width	120 mm	60 – 200
Base plate thickness	15 mm	5 – 40
Base corner radius	10 mm	2 – 30
Bolt hole spacing	90 mm	20 – 160
Bolt hole diameter	10 mm	3 – 20
Counterbore diameter	15 mm	6 – 30
Counterbore depth	5 mm	0 – 15
Hub outer diameter	71 mm	25 – 110
Overall height	80 mm	30 – 160
Main bore diameter	52.92 mm	20 – 100
Bore depth from top	55 mm	5 – 150
Spline tip diameter	36 mm	10 – 95
Number of internal teeth	10 mm	3 – 40
Spline tooth width	8 mm	2 – 20
Hub base fillet size	5 mm	0 – 15
Number of crown slots	8 mm	3 – 16
Crown slot width	8 mm	3 – 20
Crown slot depth from top	20 mm	3 – 60
Crown slot start angle	22.5 deg	0 – 90
Number of gusset ribs	4 mm	0 – 8
Rib thickness	6 mm	2 – 20
Rib radial reach past hub	13 mm	2 – 50
Rib height above plate	45 mm	5 – 120

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS