Gears and transmission
Spiral Bevel Pinion Gear
- Bounding box
- 9.6 × 9.4 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D parametric spiral bevel pinion gear with 10 teeth, 8mm outer diameter, and a 2mm shaft hole.
Parameters
| Name | Value | Range |
|---|---|---|
| Number of Teeth | 10 | 8 – 40 |
| Module | 0.8 mm | 0.3 – 3 |
| Face Width | 6 mm | 2 – 20 |
| Helix/Spiral Angle (deg) | 35 deg | 0 – 45 |
| Pressure Angle (deg) | 20 deg | 14.5 – 25 |
| Shaft Bore Diameter | 2 mm | 1 – 6 |
| Pitch Cone Half-Angle (deg) | 45 deg | 15 – 75 |
| Taper Ratio (small/large end) | 0.55 | 0.2 – 0.9 |
| Hub Extension Length | 4 mm | 1 – 15 |
| Hub Diameter | 3.5 mm | 2.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled