Everything else
Speeco TTX Aero Extension
- Bounding box
- 143.9 × 318.3 × 115.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
that is not at all like the reference Speeco TTX extensions I gave you as an example
Parameters
| Name | Value | Range |
|---|---|---|
| Extension length | 280 mm | 120 – 400 |
| Rear airfoil chord | 46 mm | 25 – 80 |
| Mid airfoil chord | 42 mm | 20 – 80 |
| Tip airfoil chord | 30 mm | 15 – 70 |
| NACA thickness ratio | 0.16 mm | 0.08 – 0.3 |
| Truncated trailing-edge thickness | 1.6 mm | 0.5 – 6 |
| Chord taper transition | 0.55 mm | 0.1 – 0.9 |
| Tip vertical rise | 22 mm | 0 – 80 |
| Upsweep start position | 0.62 mm | 0 – 0.85 |
| NACA points per side | 20 mm | 8 – 60 |
| Loft sections | 36 mm | 5 – 60 |
| Rise above the base bar | 72 mm | 0 – 120 |
| Riser completion fraction | 0.26 mm | 0.05 – 0.6 |
| Centre distance of the pair | 84 mm | 40 – 160 |
| Pad length | 115 mm | 40 – 220 |
| Pad width | 60 mm | 30 – 110 |
| Pad height | 12 mm | 4 – 30 |
| Pad corner radius | 6 mm | 0 – 20 |
| Pad centre along extension | 0.4 mm | 0.1 – 0.8 |
| Pad height above blade mid-plane | 1 mm | 0 – 10 |
| Mount position along extension | 0.7 mm | 0.3 – 0.95 |
| Plate thickness | 6 mm | 2 – 15 |
| Plate depth | 44 mm | 20 – 90 |
| Overlap onto each blade | 6 mm | 2 – 20 |
| Quarter-turn disc diameter | 34 mm | 20 – 60 |
| Base bar diameter | 31.8 mm | 22 – 40 |
| Clamp wall thickness | 4 mm | 2 – 10 |
| Clamp width along base bar | 20 mm | 8 – 40 |
| Radial clearance | 0.3 mm | 0.1 – 1 |
| Overlap with airfoil body | 1.5 mm | 0.5 – 4 |
| Clamp bolt hole diameter | 5.5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm