Brackets and mounts
Speaker Baffle 150x170 - Full-Range + Tweeter
- Bounding box
- 150.0 × 170.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D solid model of a rectangular speaker baffle. Base parameters: Width 150mm (X-axis), Height 170mm (Y-axis), Thickness 10mm (Z-axis). Origin (0,0,0) at the bottom-left front corner. Feature 1 - Full-range hole (rear-mounted): Center at (X=75, Y=55). Cylindrical through hole, diameter 74mm. Apply a 2.5mm radius roundover (R2.5 fillet) on the front edge (Z=10mm) of this hole. Feature 2 - Tweeter hole (front-mounted): Center at (X=110, Y=125). Through hole diameter 35.5mm. Counterbore on the front face (Z=10mm): diameter 52.5mm, depth 4mm. Do NOT add corner screw holes. Output as a 3D solid model (STEP or STL format).
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Width (X) | 150 mm | 60 – 400 |
| Panel Height (Y) | 170 mm | 60 – 450 |
| Panel Thickness (Z) | 10 mm | 3 – 30 |
| Full-Range Hole Dia | 74 mm | 10 – 140 |
| Full-Range Center from Left | 75 mm | 10 – 380 |
| Full-Range Center from Bottom | 55 mm | 10 – 430 |
| Front Rim Roundover R | 2.5 mm | 0 – 5 |
| Tweeter Through Hole Dia | 35.5 mm | 5 – 120 |
| Tweeter Counterbore Dia | 52.5 mm | 6 – 160 |
| Tweeter Counterbore Depth | 4 mm | 0.5 – 20 |
| Tweeter Center from Right | 40 mm | 10 – 380 |
| Tweeter Center from Top | 45 mm | 10 – 430 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent