Solar-Thermal PCM Microchannel Heat Exchanger

1 views

Bounding box: 96 × 50 × 19 mm
Engine: 3D Printing B-rep
Parameters: 24
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

工程二维线稿，剖面图，小型化光储热智能微流道换热器，黑白矢量图，无填充，线条清晰，适合学术论文。从上至下：光吸收层、相变储热层、平行微通道阵列、底部基板，左右带进出口集流腔，标注太阳光入射箭头、流体进出口、温度传感点位，简洁，工程原理图，不渲染

Parameters

Name	Value	Range
Overall length, X	80 mm	50 – 200
Overall width, Y	50 mm	30 – 120
Substrate thickness	4 mm	2 – 10
Microchannel layer height	6 mm	3 – 15
Perimeter wall width	3 mm	1.5 – 8
Number of parallel microchannels	11 mm	3 – 25
Channel width	2.2 mm	0.8 – 6
Channel wall thickness	1.65 mm	1.2 – 4
Inlet/outlet boss diameter	9 mm	5 – 20
Flow bore diameter	5 mm	2 – 12
Port boss length	8 mm	4 – 25
Tray inset from outline	2 mm	1 – 10
Tray floor thickness	1.5 mm	1 – 4
PCM pocket depth	4 mm	1 – 12
Tray wall thickness	3 mm	1.5 – 8
Divider wall thickness	2.5 mm	1 – 6
Number of PCM pockets	3 mm	1 – 8
Absorber plate thickness	2.5 mm	1 – 6
Absorber fin height	2 mm	0.6 – 6
Absorber fin width	2 mm	0.8 – 5
Gap between absorber fins	3 mm	1 – 10
Thermocouple well diameter	3.2 mm	2 – 6
Thermocouple well depth	2.4 mm	1 – 5
Thermocouple well Y offset	14 mm	3 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS