Brackets and mounts
Snap-Fit Electronics Enclosure (Base + Lid)
- Bounding box
- 80.0 × 64.0 × 29.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a 3D-printable two-piece snap-fit enclosure for an electronics project. The base needs internal mounting bosses for a small microcontroller circuit board, a rectangular cutout on the left wall for a power port, and a slotted ventilation grid on the top lid to allow airflow for an interior ambient temperature sensor."
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width (X) | 80 mm | 40 – 160 |
| Base Depth (Y) | 60 mm | 30 – 140 |
| Base Height (Z) | 25 mm | 10 – 80 |
| Wall / Floor Thickness | 2 mm | 1.2 – 5 |
| Boss Spacing (X) | 40 mm | 10 – 70 |
| Boss Spacing (Y) | 24 mm | 10 – 45 |
| Boss Diameter | 6 mm | 3 – 12 |
| Boss Height | 6 mm | 2 – 20 |
| Boss Pilot Hole (M2) | 1.7 mm | 1 – 4 |
| Port Cutout Width | 12 mm | 4 – 40 |
| Port Cutout Height | 6 mm | 3 – 20 |
| Port Center Height | 14 mm | 3 – 30 |
| Snap Tab Width | 30 mm | 8 – 70 |
| Snap Tab Thickness | 2 mm | 1 – 4 |
| Snap Tab Drop | 8 mm | 3 – 15 |
| Snap Hook Depth | 1 mm | 0.4 – 2 |
| Snap Hook Height | 1.5 mm | 0.8 – 4 |
| Lid Thickness | 4 mm | 2 – 10 |
| Vent Slot Count | 6 mm | 1 – 12 |
| Vent Slot Width | 2 mm | 1 – 8 |
| Vent Slot Length | 30 mm | 10 – 50 |
| Vent Slot Pitch | 6 mm | 2 – 20 |
| Corner Fillet Radius | 3 mm | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent