Brackets and mounts
Snap-Fit Clip Mount Bracket
- Bounding box
- 40.0 × 39.4 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a clip-on mounting bracket that snap-fits over a 1 inch square tube. The clip should be c-shaped channel with 25.4mm inner width, 3 mm wall thickness, and 20mm depth along the tube axis. Leave a 4mm gap opening on one side for a snap-fit over the tube with the opening edges rounded with a 1mm fillet for easier installation. On the outward facing side of the clip add a flat mounting plate 40mmx40mmx3mm thick, with a central 20 mm diameter circular boss protruding 5mm for attaching an accessory pod. Add two M3 screw holes through the boss, spaced 12mm apart
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Width | 25.4 mm | 10 – 100 |
| Wall Thickness | 3 mm | 1 – 10 |
| Depth (along tube) | 20 mm | 10 – 100 |
| Gap Width | 4 mm | 1 – 10 |
| Opening Edge Fillet | 1 mm | 0 – 5 |
| Mounting Plate Length | 40 mm | 20 – 100 |
| Mounting Plate Width | 40 mm | 20 – 100 |
| Mounting Plate Thickness | 3 mm | 1 – 10 |
| Boss Diameter | 20 mm | 10 – 50 |
| Boss Height | 5 mm | 1 – 20 |
| Screw Hole Diameter | 3.5 mm | 2 – 10 |
| Screw Hole Spacing | 12 mm | 6 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu