Brackets and mounts
Smartphone Holder with Clamp
- Bounding box
- 85.0 × 39.0 × 165.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
"On the absolute center of the back face of the plate, extend a solid block outward by 20mm. Cut a horizontal cylindrical channel through this block. The cylinder cutout must have a diameter of 26mm to match an oval golf trolley frame tube. Bisect this entire rear block horizontally down the center to turn it into a two-piece clamp (a top half attached to the plate, and a separate bottom cap half). Add two 4.5mm clearance holes on either side of the cylindrical channel running vertically through both halves of the clamp to accommodate M4 nuts and bolts for tightening
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width | 85 mm | 50 – 200 |
| Plate Height | 165 mm | 100 – 300 |
| Plate Thickness | 4 mm | 2 – 10 |
| Lip Depth | 14 mm | 5 – 30 |
| Lip Thickness | 3 mm | 1 – 8 |
| Shelf Depth | 15 mm | 5 – 30 |
| Shelf Thickness | 3 mm | 1 – 10 |
| Cutout Width | 25 mm | 10 – 80 |
| Fillet Radius | 3 mm | 0.1 – 5 |
| Clamp Depth (outward) | 20 mm | 10 – 40 |
| Clamp Block Height | 50 mm | 30 – 80 |
| Tube Bore Diameter | 26 mm | 10 – 50 |
| Bolt Hole Diameter | 4.5 mm | 2 – 8 |
| Bolt Hole Offset from centre | 18 mm | 5 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu