Brackets and mounts
SmartBook X Exploded Assembly
- Bounding box
- 3774.5 × 220.0 × 352.0 mm
- Engine
- Precision B-rep
- Parameters
- 88
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
Create a futuristic, minimalist adjustable book stand called SmartBook X, designed in millimetres for a Fusion 360 CAD project. Overall base: 300 mm wide × 220 mm deep × 30 mm high, with rounded R8 mm corners. Book panel: 280 mm wide × 350 mm high × 6 mm thick, with a solid centre, two symmetrical decorative vertical slots, one 70 × 8 mm top slot, and rounded corners. Book stopper: 280 × 18 × 6 mm, attached to the bottom of the panel. Adjustment: telescopic height-adjustment mechanism with 80 mm travel and panel tilt from 25° to 60°. Include a rear adjustable support arm, hinge brackets, and realistic pivot locations. Storage: a removable drawer approximately 180 × 100 × 22 mm inside the base. USB: include a small 45 × 25 × 15 mm USB-C module housing on the base side. It is a visual placeholder, not functional electronics. Style: clean, premium, futuristic, practical, with no phone stand or phone holder. Generate separate editable parts wherever possible. Use realistic clearances and mechanical connections. Keep all dimensions in millimetres. Prioritise a coherent CAD assembly over decorative rendering.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 400 mm | 250 – 800 |
| Base Width | 300 mm | 200 – 500 |
| Base Depth | 220 mm | 150 – 400 |
| Base Height | 30 mm | 15 – 80 |
| Drawer Cavity Width | 190 mm | 100 – 350 |
| Drawer Cavity Depth | 110 mm | 60 – 200 |
| Drawer Cavity Height | 24 mm | 10 – 60 |
| Cavity Floor Thickness | 4 mm | 2 – 15 |
| USB-C Recess Width | 46 mm | 20 – 80 |
| USB-C Recess Height | 26 mm | 10 – 60 |
| USB-C Recess Depth | 16 mm | 5 – 40 |
| Column Boss X Offset | 110 mm | 50 – 140 |
| Front Boss Y | 60 mm | 20 – 100 |
| Rear Boss Y | 90 mm | 40 – 110 |
| M4 Insert Hole Diameter | 4.5 mm | 3 – 8 |
| Support Anchor Hole Diameter | 6 mm | 4 – 12 |
| Panel Width | 280 mm | 150 – 400 |
| Panel Height | 350 mm | 150 – 600 |
| Panel Thickness | 6 mm | 3 – 15 |
| Vertical Slot X Offset | 45 mm | 10 – 100 |
| Vertical Slot Width | 8 mm | 2 – 20 |
| Vertical Slot Height | 140 mm | 40 – 300 |
| Vertical Slot Center Z | 190 mm | 50 – 400 |
| Top Slot Width | 70 mm | 20 – 150 |
| Top Slot Height | 8 mm | 2 – 20 |
| Top Slot Center Z | 300 mm | 100 – 500 |
| Hinge Hole X Offset | 110 mm | 40 – 130 |
| Hinge Pivot Diameter | 8 mm | 3 – 20 |
| Hinge Pivot Z | 20 mm | 5 – 80 |
| Rear Pivot Diameter | 5 mm | 2 – 12 |
| Rear Pivot Z | 120 mm | 40 – 300 |
| Stopper Width | 280 mm | 150 – 400 |
| Stopper Depth | 18 mm | 6 – 40 |
| Stopper Thickness | 6 mm | 3 – 20 |
| Stopper Hole X Offset | 100 mm | 30 – 130 |
| Stopper Hole Diameter | 4.5 mm | 3 – 8 |
| Counterbore Diameter | 8 mm | 4 – 15 |
| Counterbore Depth | 3 mm | 1 – 6 |
| Column Base Plate Size | 36 mm | 20 – 80 |
| Column Base Thickness | 4 mm | 2 – 12 |
| Outer Tube Section | 20 mm | 10 – 40 |
| Outer Tube Length | 90 mm | 50 – 150 |
| Inner Tube Section | 15 mm | 8 – 30 |
| Column Travel | 80 mm | 30 – 150 |
| Lock Collar Section | 26 mm | 16 – 50 |
| Lock Collar Height | 8 mm | 3 – 20 |
| Top Pivot Eye Diameter | 8 mm | 3 – 20 |
| Bracket Length | 30 mm | 15 – 60 |
| Bracket Width | 25 mm | 12 – 50 |
| Bracket Thickness | 6 mm | 3 – 15 |
| Upright Thickness | 6 mm | 3 – 15 |
| Upright Height | 30 mm | 15 – 60 |
| Pivot Hole Diameter | 8 mm | 3 – 20 |
| Pivot Hole Z | 20 mm | 8 – 50 |
| M4 Slot X Offset | 8 mm | 2 – 20 |
| M4 Slot Width | 4.5 mm | 2 – 10 |
| M4 Slot Length | 12 mm | 4 – 30 |
| Arm Length | 200 mm | 80 – 350 |
| Arm Width | 20 mm | 8 – 50 |
| Arm Thickness | 8 mm | 3 – 20 |
| Top Panel Pivot Diameter | 8 mm | 3 – 20 |
| Top Pivot X | 70 mm | 20 – 150 |
| Lower Slot Length | 60 mm | 20 – 150 |
| Lower Slot Width | 6 mm | 2 – 20 |
| Lower Slot X | -50 mm | -150 – -10 |
| Detent Hole Count | 3 mm | 1 – 8 |
| Detent Start X | -10 mm | -100 – 100 |
| Detent Pitch | 15 mm | 5 – 40 |
| Detent Hole Diameter | 4 mm | 2 – 10 |
| Thumb Screw Diameter | 10 mm | 4 – 25 |
| Thumb Screw Height | 8 mm | 2 – 20 |
| Drawer Width | 180 mm | 80 – 350 |
| Drawer Depth | 100 mm | 40 – 250 |
| Drawer Height | 22 mm | 10 – 60 |
| Drawer Wall Thickness | 2 mm | 1 – 8 |
| Drawer Floor Thickness | 2 mm | 1 – 8 |
| Pull Lip Width | 80 mm | 20 – 200 |
| Pull Lip Depth | 6 mm | 2 – 20 |
| Pull Lip Height | 8 mm | 2 – 20 |
| USB Housing Width | 45 mm | 20 – 100 |
| USB Housing Depth | 25 mm | 10 – 60 |
| USB Housing Height | 15 mm | 5 – 40 |
| Snap Flange Width | 49 mm | 22 – 110 |
| Snap Flange Depth | 29 mm | 12 – 70 |
| Snap Flange Thickness | 2 mm | 0.5 – 8 |
| USB Port Cut Depth | 6 mm | 2 – 15 |
| USB Port Cut Width | 12 mm | 4 – 30 |
| USB Port Cut Height | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu