Brackets and mounts
Smart Window Prototype Assembly
- Bounding box
- 840.0 × 574.3 × 855.5 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
"A highly detailed, professional 3D CAD render of a smart automated window prototype, viewed from an isometric angle. The main structure features a vertical window frame made of solid hardwood, resting on a thick hardwood base platform. Inside the frame, a clear glass window panel is pushed outward (open position). Crucially, there is only ONE heavy-duty industrial linear actuator (150kg capacity) installed on the right side. The base of this actuator is mounted on the wooden base platform, and its extendable arm connects to the lower-right side of the glass window panel, pushing it open. On the left side of the wooden base platform, prominently display the control electronics: an ESP8266 microcontroller board, a DHT22 temperature/humidity sensor, a relay module, and a power source, all neatly wired together but exposed (not in a box) for educational visibility. A flat grid-style rain sensor is mounted on the very top edge of the wooden frame. Wires cleanly route from the sensors and actuator down to the microcontroller setup. Render in a clean engineering style with realistic textures (wood, clear glass, metallic actuator, circuit boards), bright studio lighting, and a solid white background."
Parameters
| Name | Value | Range |
|---|---|---|
| Base Platform Length | 800 mm | 500 – 1200 |
| Base Platform Width | 300 mm | 200 – 500 |
| Base Platform Thickness | 50 mm | 30 – 80 |
| Window Frame Outer Width | 600 mm | 400 – 1000 |
| Window Frame Outer Height | 800 mm | 400 – 1200 |
| Window Frame Depth | 60 mm | 40 – 100 |
| Window Frame Inner Opening Width | 560 mm | 300 – 900 |
| Window Frame Inner Opening Height | 760 mm | 300 – 1100 |
| Window Frame Border Width | 20 mm | 10 – 40 |
| Glass Panel Width | 560 mm | 300 – 900 |
| Glass Panel Height | 760 mm | 300 – 1100 |
| Glass Panel Thickness | 5 mm | 3 – 12 |
| Glass Opening Angle | 30 deg | 0 – 60 |
| Actuator Body Diameter | 60 mm | 30 – 100 |
| Actuator Rod Diameter | 20 mm | 5 – 40 |
| Actuator Body Length | 500 mm | 200 – 800 |
| Actuator Mount Width | 80 mm | 30 – 150 |
| Actuator Mount Height | 40 mm | 10 – 100 |
| Actuator Base X Position | 400 mm | 300 – 500 |
| Actuator Base Y Position | -150 mm | -200 – 50 |
| ESP8266 Board Length | 50 mm | 20 – 100 |
| ESP8266 Board Width | 25 mm | 10 – 60 |
| ESP8266 Board Height | 10 mm | 2 – 20 |
| ESP8266 X Position | -300 mm | -400 – -100 |
| ESP8266 Y Position | 100 mm | 0 – 150 |
| DHT22 Sensor Length | 30 mm | 10 – 60 |
| DHT22 Sensor Width | 15 mm | 5 – 40 |
| DHT22 Sensor Height | 8 mm | 2 – 20 |
| DHT22 X Position | -260 mm | -350 – -150 |
| DHT22 Y Position | 100 mm | 0 – 150 |
| Relay Module Length | 50 mm | 20 – 100 |
| Relay Module Width | 30 mm | 10 – 60 |
| Relay Module Height | 20 mm | 5 – 40 |
| Relay Module X Position | -210 mm | -300 – -100 |
| Relay Module Y Position | 100 mm | 0 – 150 |
| Power Source Length | 100 mm | 40 – 200 |
| Power Source Width | 60 mm | 20 – 120 |
| Power Source Height | 35 mm | 10 – 80 |
| Power Source X Position | -280 mm | -400 – -100 |
| Power Source Y Position | 40 mm | 0 – 150 |
| Rain Sensor Length | 60 mm | 20 – 120 |
| Rain Sensor Width | 40 mm | 15 – 80 |
| Rain Sensor Height | 5 mm | 2 – 10 |
| Rain Sensor X Position | 0 mm | -200 – 200 |
| Rain Sensor Y Position | 0 mm | -100 – 100 |
| Wiring Harness Wire Diameter | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu