Brackets and mounts
Smart Safety Slipper - Exploded Assembly
- Bounding box
- 4780.0 × 100.0 × 82.0 mm
- Engine
- Precision B-rep
- Parameters
- 50
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a realistic 3D CAD model of a Women's Smart Safety Slipper prototype. The slipper should have hidden compartments containing: - Arduino Nano - MPU6050 (GY-521) under the heel for heel-tap detection - HC-05 Bluetooth module - 3.7V Li-ion battery - TP4056 charging module - Power switch Include internal wire routing, mounting brackets, removable bottom cover, and a waterproof electronics enclosure. Also design a separate receiver unit containing: - Arduino Uno - HC-05 Bluetooth module - Active buzzer - USB connection to a laptop Working: Three heel taps → MPU6050 → Arduino Nano → HC-05 → Receiver HC-05 → Arduino Uno → Buzzer → Laptop Dashboard. Generate: - Assembled 3D model - Exploded view - Transparent cutaway showing internal electronics - Top, side, front, and bottom views Use realistic materials (EVA sole, rubber outsole, ABS enclosure), clean cable management, and a professional engineering appearance suitable for a college hackathon prototype.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 350 mm | 100 – 1000 |
| Shell Length | 260 mm | 200 – 300 |
| Shell Width | 100 mm | 80 – 120 |
| Shell Height | 80 mm | 60 – 100 |
| Sole Thickness | 10 mm | 5 – 15 |
| Foot Cavity Length | 240 mm | 200 – 250 |
| Foot Cavity Width | 80 mm | 60 – 90 |
| Foot Cavity Height | 70 mm | 50 – 80 |
| Heel Cavity Length | 60 mm | 40 – 80 |
| Heel Cavity Width | 50 mm | 30 – 60 |
| Heel Cavity Depth | 25 mm | 15 – 35 |
| Heel Center Y | -100 mm | -120 – -80 |
| Cover Thickness | 3 mm | 1 – 5 |
| Cover Overlap | 2 mm | 0 – 10 |
| Screw Diameter | 3 mm | 1 – 5 |
| Screw Offset | 5 mm | 2 – 15 |
| Tray Length | 55 mm | 40 – 70 |
| Tray Width | 45 mm | 30 – 60 |
| Tray Height | 20 mm | 10 – 30 |
| Tray Wall Thickness | 2 mm | 1 – 5 |
| Module Board Length | 70 mm | 50 – 90 |
| Module Board Width | 40 mm | 30 – 50 |
| Module Board Thickness | 2 mm | 1 – 5 |
| Max Component Height | 25 mm | 10 – 40 |
| Switch Body Length | 12 mm | 8 – 20 |
| Switch Body Width | 7 mm | 5 – 15 |
| Switch Body Height | 15 mm | 10 – 25 |
| Switch Lever Diameter | 2 mm | 1 – 5 |
| Switch Lever Length | 10 mm | 5 – 20 |
| Receiver Bottom Length | 120 mm | 80 – 150 |
| Receiver Bottom Width | 80 mm | 60 – 100 |
| Receiver Bottom Height | 40 mm | 30 – 60 |
| Receiver Wall Thickness | 3 mm | 1 – 5 |
| Standoff Height | 5 mm | 2 – 10 |
| Receiver Top Thickness | 15 mm | 5 – 25 |
| Receiver Board Length | 70 mm | 50 – 90 |
| Receiver Board Width | 55 mm | 40 – 70 |
| Receiver Board Thickness | 2 mm | 1 – 5 |
| Arduino Uno Length | 68 mm | 60 – 80 |
| Arduino Uno Width | 53 mm | 45 – 60 |
| Arduino Uno Height | 5 mm | 1 – 10 |
| HC-05 Height | 3 mm | 1 – 8 |
| Buzzer Diameter | 12 mm | 5 – 20 |
| Buzzer Height | 10 mm | 5 – 20 |
| USB Cable Length | 1500 mm | 500 – 2000 |
| USB Cable Diameter | 4 mm | 2 – 8 |
| Bracket Length | 10 mm | 5 – 20 |
| Bracket Width | 8 mm | 4 – 15 |
| Bracket Thickness | 4 mm | 1 – 8 |
| Bracket Hole Diameter | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu