Smart Lamp Enclosure - Exploded Trio

Design a functional 3D-printable enclosure for a smart glucose status lamp. Overall dimensions: * Cylindrical body * Height: 115 mm * Outer diameter: 85 mm * Flat stable base * Rounded top and rounded external edges * Minimalist premium smart-home design The enclosure must be designed as 3 separate printable parts: 1. MAIN BODY * Outer diameter: 85 mm * Wall thickness: 2.2 mm * Internal hollow cavity for electronics * Space for a NodeMCU ESP8266 board approximately 58 x 31 x 13 mm * Add internal mounting rails or small supports for the NodeMCU * Leave at least 3 mm clearance around the board * Add internal cable routing space * Add a rear opening approximately 12 x 8 mm for USB power cable access * Add small hidden ventilation slots near the bottom 2. LED DIFFUSER RING * Create a separate removable 360-degree translucent diffuser ring * Ring positioned approximately 25 mm below the top of the lamp * Diffuser height: 20 mm * Outer diameter aligned with the main body: 85 mm * Wall thickness: approximately 1.2 to 1.5 mm * The diffuser must allow uniform RGB light around the full circumference * Add an internal mounting area centered behind the diffuser for a circular NeoPixel RGB LED ring * NeoPixel ring outer diameter approximately 50 mm * Provide simple mounting posts or supports for the LED ring * Keep the LEDs approximately 10–15 mm away from the diffuser surface to reduce visible LED hotspots 3. BOTTOM COVER * Separate removable bottom cover * Diameter matching the body * Thickness approximately 3 mm * Use a simple twist-lock, snap-fit or screw-fit connection * Bottom must remain flat * Electronics must be accessible after removing the cover ASSEMBLY REQUIREMENTS: * All parts must fit together without glue * Use tolerances suitable for FDM printing * Leave approximately 0.3–0.4 mm clearance between mating parts * Avoid difficult overhangs * Avoid supports where possible * Avoid very thin or fragile parts * Model must be watertight and manifold * Suitable for PLA or PETG printing DESIGN STYLE: * Smooth cylindrical body * Soft rounded corners * No medical symbols * No external text * No logo * Modern minimalist consumer electronics appearance * Similar to a premium smart-home ambient lamp * The lamp should look elegant on a bedside table, desk or living-room shelf FUNCTION: The internal RGB LEDs will display: * Red for low glucose * Green for normal glucose * Orange for high glucose * Purple for very high glucose * Blue for connection status Priority is FUNCTIONALITY and PRINTABILITY, not decorative complexity. Generate the model with accurate dimensions and separate components suitable for STL or STEP export.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.