Brackets and mounts
Smart IoT Modular Storage Cabinet (Assembled)
- Bounding box
- 664.0 × 313.0 × 800.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create ONE complete, fully assembled 3D model of a Smart IoT-Based Modular Storage System for a Computer Engineering laboratory. IMPORTANT: The final result must be a single assembled cabinet. Do NOT create an exploded view. Do NOT scatter, separate, or float any components. Every part must be physically connected to the cabinet in its correct position. DESIGN: - A compact, rectangular, open-front storage cabinet. - Overall dimensions: 600 mm wide, 800 mm tall, and 300 mm deep. - A stable outer frame with a bottom base, two side panels, a top panel, and a back panel. - Nine storage compartments arranged in three columns and three rows. - Horizontal shelves and vertical dividers must connect properly to the cabinet frame. - Include removable bins that fit INSIDE the compartments. - Use a clean, practical design suitable for a student engineering prototype. ELECTRONIC COMPONENTS: - Mount a small RFID reader on the front side of the cabinet. - Mount a small LCD screen and two status LEDs on the front panel. - Place a compact microcontroller enclosure on the side or back panel. - Position small load-cell platforms directly beneath selected storage bins. - Keep all electronics attached to or properly positioned on the cabinet. MODULARITY: - Show adjustable shelf positions using evenly spaced mounting slots. - Allow dividers to be repositioned within the cabinet. - Keep the cabinet structurally connected and stable. VISUAL REQUIREMENTS: - Show the complete cabinet in a front three-quarter perspective. - All components must be assembled and aligned. - No floating parts, no scattered pieces, no detached shelves, and no exploded assembly. - Use realistic proportions and simple construction that can be reproduced in a student workshop. - Prioritize the assembled cabinet over decorative details. The final output must look like one finished, functional physical prototype, not a collection of separate CAD parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Cabinet Width | 600 mm | 400 – 1200 |
| Cabinet Height | 800 mm | 500 – 1500 |
| Cabinet Depth | 300 mm | 200 – 600 |
| Panel Thickness | 18 mm | 9 – 25 |
| Base Plinth Height | 80 mm | 40 – 200 |
| Shelf Thickness | 18 mm | 9 – 25 |
| Divider Thickness | 18 mm | 9 – 25 |
| Mounting Slot Diameter | 5 mm | 3 – 10 |
| Mounting Slot Pitch | 80 mm | 40 – 150 |
| Mounting Slot Rows | 6 pcs | 2 – 10 |
| Bin Side Clearance | 4 mm | 1 – 15 |
| Bin Wall Thickness | 3 mm | 1.5 – 6 |
| Bin Height | 120 mm | 50 – 200 |
| Bin Corner Fillet | 4 mm | 0 – 10 |
| Load Cell Length | 20 mm | 10 – 60 |
| Load Cell Width | 20 mm | 10 – 60 |
| Load Cell Height | 12 mm | 5 – 30 |
| Load Cells per Shelf | 4 pcs | 2 – 6 |
| RFID Reader Width | 70 mm | 30 – 150 |
| RFID Reader Height | 45 mm | 20 – 100 |
| RFID Reader Depth | 14 mm | 6 – 40 |
| Antenna Coil Diameter | 34 mm | 10 – 80 |
| LCD Screen Width | 90 mm | 40 – 200 |
| LCD Screen Height | 60 mm | 30 – 120 |
| LED Diameter | 6 mm | 3 – 12 |
| LED Protrusion | 8 mm | 3 – 20 |
| LED Spacing | 40 mm | 20 – 100 |
| Controller Box Width | 70 mm | 40 – 150 |
| Controller Box Height | 90 mm | 40 – 200 |
| Controller Box Depth | 40 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu