Smart Glasses with Two Cameras

1 views

Bounding box: 140 × 136.6 × 58 mm
Engine: 3D Printing B-rep
Parameters: 20
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

Create a smart glasses with cameras built in two googles's front side. I want to modify these cameras later

Parameters

Name	Value	Range
Overall front width	140 mm	100 – 200
Front height	58 mm	40 – 90
Front plate thickness	6 mm	3 – 12
Front corner radius	12 mm	3 – 26
Lens opening width	46 mm	20 – 80
Lens opening height	28 mm	14 – 60
Lens opening corner radius	12 mm	3 – 25
Lens centre spacing	68 mm	40 – 130
Lens centre below frame centre	2 mm	0 – 12
Nose cut-out width	20 mm	8 – 40
Nose cut-out height	18 mm	4 – 30
Temple arm length	125 mm	60 – 180
Temple arm height at the front	12 mm	6 – 24
Temple arm thickness	5 mm	2.5 – 10
Camera centre from the middle	51 mm	20 – 70
Camera centre height	49 mm	24 – 70
Camera pocket width	13 mm	8 – 24
Camera pocket height	10 mm	6 – 20
Camera pocket depth	4 mm	2 – 6
Camera sliding fit clearance	0.15 mm	0.1 – 0.4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS