Brackets and mounts
Smart Drainage Pipe Monitoring System (Exploded Multi-Part)
- Bounding box
- 3041.1 × 340.1 × 356.0 mm
- Engine
- Precision B-rep
- Parameters
- 81
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a smart drainage pipe monitoring system. Include a transparent horizontal drainage pipe with six branch connections, a water-level sensor mounted above the pipe, a flow sensor installed inline, a pressure sensor connected through a side port, and an acoustic sensor attached to the pipe wall. Add a motorized vent valve and a removable blockage object inside the pipe. Show the complete assembly in an isometric view with each component clearly separated and labelled. Use realistic mechanical proportions, millimetre dimensions, mounting brackets, and connectors. Generate editable 3D geometry rather than only a rendered image.
Parameters
| Name | Value | Range |
|---|---|---|
| Pipe Outer Diameter (DN200) | 200 mm | 110 – 400 |
| Pipe Wall Thickness | 8 mm | 3 – 20 |
| Pipe Length | 1200 mm | 500 – 3000 |
| End Flange OD | 260 mm | 210 – 450 |
| End Flange Thickness | 20 mm | 8 – 50 |
| Saddle Land Width | 24 mm | 8 – 60 |
| Saddle Land Height | 5 mm | 1 – 15 |
| Branch Stub Count | 6 pcs | 1 – 10 |
| Branch Pitch | 150 mm | 80 – 400 |
| First Branch Position | 150 mm | 50 – 700 |
| Branch Stub OD (DN50) | 60 mm | 20 – 120 |
| Branch Stub Wall | 4 mm | 2 – 10 |
| Branch Stub Length | 70 mm | 20 – 200 |
| Branch Flange OD | 125 mm | 70 – 200 |
| Branch Flange Thickness | 16 mm | 8 – 40 |
| Housing Width | 80 mm | 40 – 200 |
| Housing Depth | 60 mm | 30 – 160 |
| Housing Height | 40 mm | 20 – 120 |
| Adapter Neck Diameter | 50 mm | 20 – 100 |
| Adapter Neck Height | 20 mm | 5 – 60 |
| DN50 Adapter Flange OD | 110 mm | 70 – 200 |
| Adapter Flange Thickness | 14 mm | 6 – 40 |
| Sensing Face Diameter | 46 mm | 20 – 90 |
| M6 Mounting Hole | 6.6 mm | 3 – 14 |
| Hole Edge Inset | 9 mm | 4 – 25 |
| Face-to-Face Length | 200 mm | 100 – 400 |
| Spool OD | 220 mm | 120 – 420 |
| Bore (DN200) | 200 mm | 100 – 400 |
| DN200 Flange OD | 340 mm | 240 – 520 |
| Flange Thickness | 24 mm | 10 – 60 |
| Junction Box Length | 120 mm | 40 – 260 |
| Junction Box Width | 90 mm | 30 – 200 |
| Junction Box Height | 80 mm | 25 – 180 |
| M16 Bolt Hole | 18 mm | 6 – 36 |
| Flange Bolt Circle | 295 mm | 150 – 460 |
| Transmitter Body Diameter | 70 mm | 30 – 140 |
| Transmitter Body Length | 100 mm | 40 – 220 |
| Hex Across Flats | 46 mm | 20 – 90 |
| Hex Body Length | 26 mm | 10 – 60 |
| 1/2in BSP Port Diameter | 25 mm | 10 – 60 |
| Side Port Length | 30 mm | 10 – 80 |
| Cable Gland Diameter | 30 mm | 10 – 70 |
| Cable Gland Length | 22 mm | 5 – 60 |
| Sensor Diameter | 50 mm | 20 – 120 |
| Sensor Height | 30 mm | 12 – 90 |
| Clamp/Magnet Base Size | 60 mm | 20 – 140 |
| Base Thickness | 8 mm | 3 – 25 |
| M8 Stud Diameter | 8 mm | 3 – 20 |
| Stud Length | 20 mm | 5 – 60 |
| Cable Connector Diameter | 14 mm | 5 – 40 |
| Cable Connector Length | 18 mm | 5 – 60 |
| Valve Face-to-Face | 150 mm | 80 – 320 |
| Valve Body Diameter | 90 mm | 40 – 200 |
| Valve Bore (DN50) | 50 mm | 15 – 120 |
| DN50 Flange OD | 165 mm | 90 – 260 |
| Flange Thickness | 20 mm | 8 – 50 |
| M16 Flange Bolt Hole | 18 mm | 6 – 36 |
| Flange Bolt Circle | 125 mm | 60 – 200 |
| Actuator Neck Diameter | 60 mm | 20 – 140 |
| Actuator Neck Height | 40 mm | 10 – 120 |
| Actuator Length | 150 mm | 60 – 320 |
| Actuator Width | 120 mm | 50 – 260 |
| Actuator Height | 100 mm | 40 – 260 |
| Blockage Diameter | 180 mm | 80 – 300 |
| Blockage Length | 250 mm | 80 – 500 |
| Sealing Rib Width | 10 mm | 3 – 30 |
| Sealing Rib Count | 4 pcs | 1 – 8 |
| Pull Handle Diameter | 16 mm | 6 – 50 |
| Pull Handle Length | 80 mm | 20 – 200 |
| Saddle Band Width | 80 mm | 20 – 200 |
| Saddle Strap Thickness | 6 mm | 2 – 20 |
| Rubber Pad Thickness | 4 mm | 1 – 20 |
| M8 Anchor Bolt Diameter | 8 mm | 3 – 24 |
| Branch Adapter Flange OD | 165 mm | 80 – 260 |
| Adapter Flange Thickness | 20 mm | 8 – 50 |
| Adapter Stub OD (DN50) | 60 mm | 20 – 140 |
| Adapter Stub Length | 100 mm | 20 – 250 |
| Adapter Bore | 52 mm | 15 – 120 |
| Adapter Bolt Circle | 125 mm | 60 – 200 |
| Gasket Thickness | 3 mm | 1 – 10 |
| Explode Gap Between Parts | 60 mm | 5 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu