Brackets and mounts
Smart Date Palm Tree Collar
- Bounding box
- 431.5 × 459.1 × 400.1 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete, editable 3D CAD model of a smart date palm tree collar designed to help detect red palm weevil activity. The device must wrap around the OUTSIDE of a date palm tree trunk like a protective ring. Design the following components: 1. An adjustable circular collar made of two halves, with a hinge on one side and a locking latch on the other. 2. Four vibration and acoustic sensor holders positioned around the inside of the collar to gently contact the tree trunk. 3. A weather-resistant electronics enclosure mounted on the outside of the collar. 4. A front LED indicator panel with green, yellow, and red lights. 5. A small solar panel mounting bracket on top of the electronics enclosure. 6. Protected cable channels connecting the sensors to the electronics enclosure. 7. Soft replaceable contact pads to prevent damage to the tree bark. 8. Removable covers and screw holes for maintenance. 9. A cylindrical palm tree trunk mock-up to demonstrate how the collar fits around the tree. PRELIMINARY DIMENSIONS: - Adjustable trunk diameter: 300–600 mm. - Collar height: 80 mm. - Approximate wall thickness: 4 mm. ENGINEERING REQUIREMENTS: - Keep all electronics outside the tree. - Do not drill into or cut the trunk. - Do not make the collar tight enough to restrict tree growth. - Make the components separate, editable, and suitable for 3D printing. - Use weather-resistant, UV-resistant materials suitable for outdoor use in hot climates. - Show the complete assembly in a realistic 3D isometric view. - Create an exploded view with every component clearly separated. - Include dimensions in millimetres. - Generate actual 3D geometry, not just a picture or concept illustration. - Export the model as STEP and STL if supported. First, generate the complete model automatically. Then show the 3D preview and explain how to export the files. This is an early prototype. The sensors are intended to monitor possible pest activity; actual detection performance must be scientifically tested and validated.
Parameters
| Name | Value | Range |
|---|---|---|
| Trunk Diameter | 400 mm | 300 – 600 |
| Trunk Mock-up Height | 200 mm | 100 – 300 |
| Collar Height | 80 mm | 40 – 150 |
| Collar Wall Thickness | 4 mm | 2 – 10 |
| Trunk-Collar Clearance | 5 mm | 2 – 20 |
| Split Gap Width | 4 mm | 2 – 10 |
| Hinge Pin Radius | 5 mm | 3 – 10 |
| Latch Block Thickness | 8 mm | 4 – 15 |
| Latch Block Width | 20 mm | 10 – 40 |
| Sensor Radius | 4 mm | 2 – 8 |
| Enclosure Width | 80 mm | 40 – 150 |
| Enclosure Height | 60 mm | 30 – 120 |
| Enclosure Thickness | 40 mm | 20 – 80 |
| LED Radius | 3 mm | 1 – 6 |
| LED Protrusion | 2 mm | 1 – 5 |
| LED Spacing | 15 mm | 5 – 30 |
| Solar Bracket Thickness | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu