Everything else
Smart Blind Stick with Arduino Sensors and Vibrators
- Bounding box
- 202.9 × 50.5 × 1195.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 29
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
Act like an mechanical engineer design visually blind manstick in this include arduino sensor four side vibrators voice translated ai assistant give me the 3D view of a stick
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft length | 1000 mm | 600 – 1400 |
| Shaft bottom diameter | 14 mm | 10 – 25 |
| Shaft top diameter | 10 mm | 8 – 20 |
| Handle grip length | 120 mm | 60 – 200 |
| Handle tube diameter | 22 mm | 16 – 30 |
| Handle hook radius | 60 mm | 30 – 100 |
| Hook smoothness | 24 mm | 8 – 48 |
| Rolling tip diameter | 25 mm | 15 – 40 |
| Sensor housing diameter | 32 mm | 20 – 60 |
| Sensor housing height | 70 mm | 30 – 100 |
| Sensor height from floor | 60 mm | 20 – 200 |
| Ultrasonic sensor eye diameter | 13 mm | 8 – 20 |
| Ultrasonic sensor eye length | 9 mm | 4 – 20 |
| Vibrator collar diameter | 24 mm | 16 – 40 |
| Vibrator collar height | 20 mm | 8 – 30 |
| Vibrator 1 height | 550 mm | 400 – 900 |
| Vibrator 2 height | 610 mm | 400 – 900 |
| Vibrator 3 height | 670 mm | 400 – 900 |
| Vibrator 4 height | 730 mm | 400 – 900 |
| Vibrator motor bump diameter | 10 mm | 6 – 20 |
| Electronics ring height | 30 mm | 10 – 50 |
| Electronics ring outer diameter | 30 mm | 20 – 60 |
| Electronics box length | 55 mm | 30 – 80 |
| Electronics box width | 30 mm | 20 – 60 |
| Electronics box height | 55 mm | 30 – 80 |
| Electronics box height | 810 mm | 600 – 1000 |
| Speaker diameter | 20 mm | 10 – 30 |
| Microphone diameter | 6 mm | 3 – 12 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm