Smart Animal Collar

Design a 3D Model of a smart collar which I have to build with temperature sensors, motion sensors. It has a battery on the back and has a solar panel on top. It's used for animals to check irregular movements to prevent diseases before hand. It's connected to a app on phone which gives time to time updates. Also it has transceivers, gps, antenna, microcontroller, continuous monitoring data transmission to mobile app/database. This is the blueprint i'm following so give a 3D Model according to this. Bottom Box & Protective Layer: 65 mm length, 45 mm width, 25 mm height. Solar Panel: 55 mm length, 35 mm width , 2 mm thickness, surface-mounted neatly on top of the waterproof protective layer. Straps: 25 mm width, 2 mm thickness, designed to thread securely through or attach to the sides of the main housing. Lithium-ion Battery Pack: 50 mm length, 30 mm width , 12 mm height, positioned at the rear of the assembly. Main Chip / Microcontroller: 25 mm length, 20 mm width, 3 mm height. GPS Receiver Module: 15 mm length, 15 mm width, 5 mm height. Sensor (Vibration & Temperature): 10 mm length, 8 mm width, 4 mm height, placed flush against the inner base for optimal contact and motion detection. Antenna: 25 mm height, 6 mm base diameter, protruding vertically or angled slightly from the top housing for optimal signal transmission. C-Type USB Port: 8 mm width, 3 mm height, 2.5 mm depth, embedded opposite the battery pack on the outer rim of the bottom box.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.