Slotted Reservoir with Filleted Lower Slot

1 views

Bounding box: 120.0 × 50.0 × 160.0 mm
Engine: Precision B-rep
Parameters: 32
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

Modify the current model only. Keep all existing geometry unchanged. On the LOWER front slot only, add a fillet to the INNER LOWER EDGE. Target edge: - lower slot - inner face at Y = 3 mm - lower edge at Z = 130.1 mm Fillet radius = 1.5 mm. Apply the fillet continuously along the complete lower slot edge, including the rounded ends. Keep the external slot opening unchanged: - width 103 mm - height 3.8 mm - center X = 60 mm - center Z = 132 mm Do not modify the upper slot. Do not modify the reservoir dimensions. Do not add any other feature.

Parameters

Name	Value	Range
Outer Length X	120 mm	80 – 200
Outer P0 Y	0 mm	0 – 200
Outer P0 Z	0 mm	0 – 200
Outer P1 Y	0 mm	0 – 200
Outer P1 Z	160 mm	0 – 200
Outer P2 Y	50 mm	0 – 200
Outer P2 Z	160 mm	0 – 200
Outer P3 Y	50 mm	0 – 200
Outer P3 Z	0 mm	0 – 200
Outer P4 Y	25 mm	0 – 200
Outer P4 Z	0 mm	0 – 200
Inner Cavity X Min	5 mm	0 – 50
Inner Cavity X Max	115 mm	50 – 200
Inner P0 Y	3 mm	0 – 200
Inner P0 Z	3 mm	0 – 200
Inner P1 Y	3 mm	0 – 200
Inner P1 Z	157 mm	0 – 200
Inner P2 Y	47 mm	0 – 200
Inner P2 Z	157 mm	0 – 200
Inner P3 Y	47 mm	0 – 200
Inner P3 Z	3 mm	0 – 200
Inner P4 Y	25 mm	0 – 200
Inner P4 Z	3 mm	0 – 200
Slot Width	103 mm	50 – 200
Slot Height	3.8 mm	1 – 20
Slot End Radius	1.9 mm	0.5 – 5
Slot Center X	60 mm	20 – 200
Lower Slot Center Z	132 mm	50 – 200
Upper Slot Center Z	145 mm	50 – 200
Front Wall Outer Y	0 mm	0 – 10
Front Wall Inner Y	3 mm	1 – 10
Lower Slot Inner Fillet Radius	1.5 mm	0.1 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS