Loading the interactive model…
Interactive 3D model of Sloped-Ceiling Wardrobe AssemblyEverything else
Sloped-Ceiling Wardrobe Assembly
11 views
- Bounding box
- 1236.0 × 910.0 × 2400.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
I have a sloped ceiling that needs a wardrobe with mainly an angle of 26 degrees
Parameters
| Name | Value | Range |
|---|---|---|
| Side Panel Thickness | 18 mm | 12 – 30 |
| Internal Width | 1200 mm | 600 – 2400 |
| Depth (front to back) | 600 mm | 400 – 800 |
| High Side Height (at rear) | 2400 mm | 1800 – 3000 |
| Low Side Height (at front) | 2000 mm | 1500 – 2500 |
| Back Panel Thickness | 6 mm | 3 – 12 |
| Bottom Panel Thickness | 18 mm | 12 – 30 |
| Top Panel Thickness | 18 mm | 12 – 30 |
| Shelf Thickness | 18 mm | 12 – 30 |
| Shelf Height (Z) | 1000 mm | 800 – 1500 |
| Door Thickness | 18 mm | 12 – 30 |
| Each Door Width | 600 mm | 400 – 900 |
| Door Height | 2000 mm | 1500 – 2500 |
| Hanging Rail Diameter | 25 mm | 15 – 40 |
| Hanging Rail Length | 1150 mm | 800 – 1400 |
| Hanging Rail Height (Z) | 1900 mm | 1600 – 2200 |
| Hanging Rail Y Position (from front) | 300 mm | 100 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS