Sloped Arch Bracket

1 views

Bounding box: 51 × 31 × 36 mm
Engine: 3D Printing B-rep
Parameters: 16
Published: November 9, 2026

Download

Free to download and use. See the terms.

The prompt

Build me an 3d

Parameters

Name	Value	Range
Overall width X	51 mm	20 – 200
Overall depth Y	31 mm	10 – 200
Overall height Z	36 mm	10 – 200
Base block height	8 mm	2 – 20
Ground clearance notch height	4 mm	0.5 – 12
Ground clearance notch width	17 mm	4 – 60
Width of the right hand base tab	17 mm	2 – 60
Flat top face width	17 mm	4 – 60
Radius of the arched hole	6 mm	2 – 16
Straight leg height below the arc	8 mm	1 – 26
Depth of the flat top face	4 mm	1 – 20
Vertical face height under the top	6 mm	1 – 20
Y position of the shoulder step	17 mm	3 – 40
Z height of the shoulder step	13 mm	2 – 34
Length of the horizontal shoulder	5 mm	1 – 20
Height of the front lip	8 mm	2 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS