Everything else
Slingshot Light Stick (Exploded Multi-Part)
- Bounding box
- 980.0 × 60.0 × 340.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- August 18, 2026
Download
Free to download and use. See the terms.
The prompt
i want to create a light stick to be held at a concernt. it is to be in the shape of a sling shot. y shape. rounded handle and sling. i want the Y shape, the sling shot portion to be hollowd out to allow for a led insert to be put in. the handle should be hollowed out as well in be able to hold the battle compoent that will bve used to power the lights. i want the name of the group to be embeeded into the handle portion. "LNGSHOT". i want that to be in blue, and i want the sling shot to be in white. when designing the file, i want the lettering to be printed as a seperetae file so that i can print and then insert into the handle to make 3d printing easie as a single color print. i want the inverse on the handle so that i can insert the letters after print. but i want it to have a smoooth finish, to sit flush when it's inserted.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Height | 300 mm | 200 – 500 |
| Body Width | 180 mm | 120 – 300 |
| Body Thickness | 30 mm | 20 – 60 |
| Handle Width | 30 mm | 20 – 50 |
| Arm Width | 15 mm | 10 – 30 |
| Fork Height | 120 mm | 60 – 200 |
| Wiring Channel Diameter | 8 mm | 4 – 15 |
| Arm Channel Depth | 190 mm | 120 – 250 |
| LED Insert Length | 140 mm | 80 – 200 |
| LED Insert Width | 12 mm | 8 – 20 |
| LED Insert Thickness | 8 mm | 5 – 15 |
| LED Channel Clearance | 0.5 mm | 0.2 – 2 |
| LED Wiring Tail Length | 40 mm | 20 – 80 |
| LED Wiring Tail Diameter | 3 mm | 1 – 6 |
| Battery Length | 95 mm | 70 – 150 |
| Battery Width | 22 mm | 15 – 40 |
| Battery Height | 22 mm | 15 – 40 |
| Battery Compartment Clearance | 0.5 mm | 0.2 – 2 |
| End Cap Diameter | 30 mm | 20 – 50 |
| End Cap Thickness | 8 mm | 4 – 15 |
| Inlay Length | 100 mm | 60 – 160 |
| Inlay Width | 20 mm | 10 – 40 |
| Inlay Thickness | 2 mm | 1 – 5 |
| Inlay Pocket Clearance | 0.2 mm | 0.1 – 1 |
| Layout Gap | 220 mm | 150 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like