Everything else
Sliding-Lid Tissue Box
- Bounding box
- 250.5 × 88.5 × 135.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
紙巾盒 尺寸為 250 × 80 × 120 mm(長 × 闊 × 高)。 圓形滑槽、旋鈕及鎖孔保持正圓 左右滑槽只拉長直線部分 各滑動部件已同步調整,保留原本裝配關係 STL 已置中並將最低點設為 Z=0,方便匯入切片軟件
Parameters
| Name | Value | Range |
|---|---|---|
| Box length X | 250 mm | 100 – 400 |
| Box width Y | 80 mm | 40 – 200 |
| Box height Z | 120 mm | 40 – 300 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Floor thickness | 3 mm | 1.2 – 8 |
| Slide slot width / round end dia | 6.5 mm | 3 – 14 |
| Straight length of the side slots | 70 mm | 20 – 160 |
| Slot centre height | 108 mm | 30 – 200 |
| Lid pin diameter | 6 mm | 3 – 12 |
| Lid pin position along X | 0 mm | -80 – 80 |
| Lid plate thickness | 6 mm | 2 – 12 |
| Lid side flange thickness | 4 mm | 2 – 10 |
| Lid flange drop below the rim | 16 mm | 6 – 40 |
| Knob diameter | 22 mm | 8 – 40 |
| Knob height | 10 mm | 3 – 30 |
| Knob position along X | 100 mm | -110 – 110 |
| Tissue opening length | 140 mm | 40 – 220 |
| Tissue opening width | 30 mm | 10 – 70 |
| Tissue opening corner radius | 12 mm | 2 – 20 |
| Lock hole diameter | 6 mm | 2 – 14 |
| Lock hole offset in Y | 25 mm | 0 – 38 |
| Lock hole height | 70 mm | 5 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
