Brackets and mounts
Sliding Gate Linear Guide Assembly
- Bounding box
- 220.0 × 35.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable linear sliding guide system. The assembly must contain: 1. Sliding gate: - 60 mm long - 35 mm wide - 3 mm thick 2. Left guide rail: - 70 mm long - U-shaped channel - Internal clearance 0.4 mm 3. Right guide rail: - 70 mm long - U-shaped channel - Internal clearance 0.4 mm Requirements: - Gate must slide between both rails - Movement only along X axis - Stroke 50 mm - Prevent vertical movement - Prevent rotation - PLA printable - M3 mounting holes in rails - Generate rails as actual sliding channels, not simple bars - Generate all parts as separate solids
Parameters
| Name | Value | Range |
|---|---|---|
| Gate Length (X) | 60 mm | 20 – 200 |
| Gate Width (Y) | 35 mm | 15 – 120 |
| Gate Thickness | 3 mm | 1 – 10 |
| Gate Hole Dia (M3 clearance) | 3.4 mm | 2 – 6 |
| Gate Hole Inset | 8 mm | 4 – 40 |
| Rail Length (X) | 70 mm | 30 – 250 |
| Rail Width (Y) | 8 mm | 6 – 25 |
| Rail Height (Z) | 8 mm | 6 – 25 |
| Channel Depth (Y) | 4 mm | 1.5 – 12 |
| Sliding Clearance (per side) | 0.4 mm | 0.1 – 1.5 |
| Rail Mounting Hole Dia (M3) | 3.4 mm | 2 – 6 |
| Mounting Hole Spacing (Stroke 50) | 50 mm | 10 – 150 |
| Edge Fillet | 0.8 mm | 0 – 3 |
| Exploded Layout Gap | 10 mm | 0 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent