Brackets and mounts
Slat Track Roller Housing
- Bounding box
- 120 × 70 × 57 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Design a lightweight aerospace wing leading edge slat track roller housing. Include a rectangular base plate with mounting bolt holes and two parallel vertical housing arms to hold dual roller bearing pins. Connect the roller housings to the base using organic truss-style diagonal webbing with hollowed internal weight-reduction pockets to minimize mass under high aerodynamic shear loads.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate length | 120 mm | 60 – 240 |
| Base plate width | 70 mm | 40 – 160 |
| Base plate thickness | 5 mm | 3 – 15 |
| Base edge rounding | 2 mm | 0 – 6 |
| Mounting bolt hole diameter | 5.5 mm | 3 – 10 |
| Mounting hole edge distance | 10 mm | 5 – 20 |
| Housing arm length along X | 60 mm | 30 – 140 |
| Arm height above base top | 45 mm | 25 – 120 |
| Arm plate thickness along Y | 6 mm | 2 – 12 |
| Clean gap between inner arm faces | 28 mm | 12 – 80 |
| Dual roller bearing pin hole diameter | 8 mm | 4 – 16 |
| Horizontal spacing between dual pins | 24 mm | 10 – 80 |
| Pin height above base top | 18 mm | 8 – 45 |
| Diagonal truss foot extension from arm end | 18 mm | 10 – 40 |
| Truss outer rounding | 6 mm | 0 – 12 |
| Truss pocket wall thickness | 3 mm | 1.2 – 8 |
| Base weight-reduction pocket diameter | 20 mm | 10 – 50 |
| Base pocket offset from center along X | 30 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu