Gears and transmission
SkyFalcon VTOL - Ducts, Pylons, Rotors, Skids and Connectors
- Bounding box
- 229.9 × 200 × 65.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
SkyFalcon VTOL propulsion and landing gear set with mortise pockets, rotor axles and skid struts for attaching the STL parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Wing span | 180 mm | 140 – 200 |
| Wing root chord | 44 mm | 36 – 48 |
| Aileron chord | 12 mm | 8 – 16 |
| Elevator chord | 14 mm | 10 – 18 |
| Rudder hinge position along X | 81 mm | 76 – 86 |
| Gap between hinge knuckles | 0.4 mm | 0.2 – 0.8 |
| Hinge pin hole, for 1.75 mm filament | 2 mm | 1.8 – 2.4 |
| Socket clearance per side | 0.15 mm | 0.05 – 0.4 |
| Dowel and peg diameter | 3.2 mm | 3 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled