Gears and transmission
SkyFalcon VTOL - Ducts, Pylons, Rotors, Skids and Connectors
- Bounding box
- 229.9 × 200 × 65.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
SkyFalcon VTOL propulsion and landing gear set with mortise pockets, free-spinning rotor axles and skid struts for attaching the STL parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Wing span | 180 mm | 140 – 200 |
| Wing root chord | 44 mm | 36 – 48 |
| Aileron chord | 12 mm | 8 – 16 |
| Elevator chord | 14 mm | 10 – 18 |
| Rudder hinge position along X | 81 mm | 76 – 86 |
| Gap between hinge knuckles | 0.4 mm | 0.2 – 0.8 |
| Hinge pin hole, for 1.75 mm filament | 2 mm | 1.8 – 2.4 |
| Socket clearance per side | 0.15 mm | 0.05 – 0.4 |
| Dowel and peg diameter | 3.2 mm | 3 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled