Everything else
Skruvdragarhållare för verktygsvägg – justerbar prototyp
- Bounding box
- 104 × 105 × 120 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
3D-printbar hållare för en skruvdragare, skruvas fast på Biltema arbetsvägg med hål. Preliminära mått, ej verifierad passform mot specifik vägg eller skruvdragare.
Parameters
| Name | Value | Range |
|---|---|---|
| Handle opening | 42 mm | 30 – 60 |
| Projection from wall | 105 mm | 80 – 140 |
| Horizontal slot centre distance | 64 mm | 50 – 75 |
| Vertical screw spacing | 85 mm | 70 – 90 |
| Screw clearance | 4.5 mm | 4 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm