Brackets and mounts
Skeletal Wing Bottle Holder
- Bounding box
- 155.4 × 91.0 × 96.5 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
Reshape the current model into a symmetrical skeletal wing structure. Keep the 91 mm inner diameter and the existing cylindrical holder. Replace the current horizontal, parallel fin-like ribs with fewer, larger, curved bone-like blades. Create a clear left-right mirrored wing structure: - 5–6 major blades per side - Each blade starts thick at the root - Curves upward and outward - Gradually tapers into a sharp pointed tip - Different blades should have different curvature and length - Blades should overlap slightly to create layered depth The wing should spread outward from the middle of the holder and curve upward at the outer tips, forming a strong skeletal-wing silhouette. Do not make the blades horizontal, parallel, evenly spaced, or rectangular. Remove the excessive vertical cage bars and keep only the structural cylindrical band and necessary supports. The result should look like two large symmetrical skeletal wings wrapping around the bottle, with elegant curved bone spines rather than mechanical fins or a ribbed cage. Keep the geometry thick, smooth, sculptural, and suitable for 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Holder Diameter | 91 mm | 50 – 150 |
| Holder Height | 80 mm | 40 – 150 |
| Wall Thickness | 4 mm | 2 – 10 |
| Blades per Side | 6 | 5 – 7 |
| Blade Base Span | 28 mm | 15 – 50 |
| Blade Base Rise | 30 mm | 15 – 60 |
| Blade Base Width | 12 mm | 6 – 25 |
| Blade Root Thickness | 6 mm | 3 – 12 |
| Blade Tip Thickness | 2 mm | 1 – 6 |
| Blade Start Height | 10 mm | 0 – 30 |
| Blade Vertical Spacing | 12 mm | 5 – 25 |
| Blade Root Penetration | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent