Brackets and mounts
Skeletal Wing Bottle Holder
- Bounding box
- 133.5 × 96.0 × 74.2 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the current model to match the reference image more closely. Keep the cylindrical holder, but make it shorter and more open. Replace the radial spike-like fins with large curved skeletal wing blades. The blades should: - Curve around the bottle rather than pointing straight outward - Be wide and thick at the root - Gradually taper toward the tip - Have smooth flowing curvature - Overlap vertically in layered sections - Resemble curved ribs, bone blades, or skeletal wing feathers Create approximately 5–7 major curved blades on each side, arranged symmetrically around the bottle. The blades should follow the bottle's cylindrical surface and project outward gradually, instead of radiating directly from the center. Make the blades substantially thicker and wider than the current model. The overall silhouette should resemble a pair of symmetrical skeletal wings wrapping around the bottle, with long curved bone-like tips. Do not create: radial spikes, straight fins, thin rods, flat plates, or starburst-like geometry. Keep the holder open and lightweight, with the cylindrical band only providing the necessary structural support.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Diameter | 91 mm | 50 – 150 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| Height | 70 mm | 40 – 120 |
| Spine Width | 12 mm | 5 – 25 |
| Spine Thickness | 6 mm | 3 – 12 |
| Blades per Side | 6 | 5 – 7 |
| Blade Thickness | 4 mm | 2 – 8 |
| Blade Root Width | 14 mm | 8 – 25 |
| Blade Length | 35 mm | 20 – 60 |
| Blade Curve Angle | 60 deg | 30 – 90 |
| Blade Vertical Rise | 20 mm | 5 – 40 |
| Blade Overlap | 0.3 | 0 – 0.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent