Skateboard Storage Base

1 views

Bounding box: 130 × 100 × 52 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

How are the 3 parts connected?

Parameters

Name	Value	Range
Total length front-to-back	130 mm	100 – 180
Total height	52 mm	40 – 80
Overall width	100 mm	70 – 150
Side arm thickness	12 mm	8 – 20
Cradle slot width	18 mm	12 – 28
Cradle backward tilt	18 deg	10 – 30
Crossbar depth	14 mm	8 – 22
Crossbar height	12 mm	8 – 20
A-frame wall thickness	6 mm	4 – 10
Mortise pocket depth	7 mm	4 – 12
Sliding fit clearance per side	0.2 mm	0.1 – 0.5
M4 screw through-hole diameter	4.5 mm	3 – 6
Screw counterbore diameter	8.5 mm	6 – 12
Screw counterbore depth	2.5 mm	1.5 – 5
M4 screw pilot hole in tenon	3.2 mm	2 – 4.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS