Everything else
Skadis Allen Key Holder (9 Keys, 4 Hooks)
- Bounding box
- 161.6 × 28 × 24 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
make the space between the small holes smaller. from 1.5 to 5 I need 15mm and from 5 to 6 20mm. Between 6 and 8 and 8 and 10 25mm
Parameters
| Name | Value | Range |
|---|---|---|
| Spacing for keys up to 5 mm | 15 mm | 10 – 30 |
| Spacing between 5 and 6 mm keys | 20 mm | 15 – 30 |
| Spacing for 6 mm and larger keys | 25 mm | 20 – 35 |
| Pocket depth for short arm | 16 mm | 10 – 30 |
| Hole clearance over key size | 0.6 mm | 0.2 – 1.2 |
| Rack bar height | 24 mm | 20 – 40 |
| Rack bar depth | 20 mm | 16 – 36 |
| Vertical corner rounding | 3 mm | 0 – 8 |
| Number of Skadis hooks | 4 mm | 2 – 6 |
| Peg centre distance | 40 mm | 20 – 80 |
| Peg diameter | 4.5 mm | 4 – 4.8 |
| Peg length through the board | 8 mm | 6 – 14 |
| Peg height above base | 20 mm | 10 – 30 |
| Skadis board thickness | 5 mm | 3 – 8 |
| Hook tab thickness behind board | 2.5 mm | 1.6 – 5 |
| Hook tab drop below the peg | 5 mm | 3 – 10 |
| Hook tab width | 4.5 mm | 3 – 9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm