Gears and transmission
Single-Stage Gearbox Assembly
- Bounding box
- 122.1 × 102.0 × 91.7 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
design gearbox
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length (X) | 120 mm | 60 – 300 |
| Housing Width (Y) | 80 mm | 40 – 200 |
| Housing Height (Z) | 80 mm | 40 – 200 |
| Wall Thickness | 6 mm | 3 – 15 |
| Top Cover Thickness | 8 mm | 3 – 20 |
| Gear Module | 1.5 mm | 0.5 – 4 |
| Input Gear Teeth | 20 teeth | 8 – 60 |
| Output Gear Teeth | 40 teeth | 10 – 80 |
| Input Gear Face Width | 10 mm | 4 – 40 |
| Output Gear Face Width | 12 mm | 4 – 40 |
| Input Shaft Diameter | 8 mm | 4 – 30 |
| Input Shaft Length | 60 mm | 20 – 200 |
| Output Shaft Diameter | 12 mm | 4 – 40 |
| Output Shaft Length | 70 mm | 20 – 200 |
| Keyway Width | 3 mm | 1.5 – 12 |
| Keyway Depth | 1.5 mm | 0.5 – 6 |
| Bearing Outer Diameter | 20 mm | 10 – 60 |
| Bearing Width | 8 mm | 4 – 25 |
| Bolt Shank Diameter | 4 mm | 2 – 12 |
| Bolt Head Across Flats | 7 mm | 3 – 19 |
| Bolt Head Height | 4 mm | 1.5 – 12 |
| Cover Clearance Hole Dia | 4.5 mm | 2 – 14 |
| Housing Tap Drill Dia | 3.3 mm | 1.5 – 11 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled