Gears and transmission
Single Shaft Bottle Shredder
- Bounding box
- 438 × 160 × 259 mm
- Engine
- 3D Printing B-rep
- Parameters
- 28
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design of an automated single shaft plastic bottle shredder with hopper , motor , gear reducer
Parameters
| Name | Value | Range |
|---|---|---|
| Chamber outer width X | 180 mm | 120 – 280 |
| Chamber outer depth Y | 130 mm | 100 – 200 |
| Chamber height Z | 90 mm | 60 – 160 |
| Wall thickness | 8 mm | 4 – 16 |
| Hopper top width | 210 mm | 150 – 320 |
| Hopper top depth | 150 mm | 120 – 240 |
| Hopper bottom width | 176 mm | 120 – 260 |
| Hopper bottom depth | 126 mm | 100 – 200 |
| Hopper height | 100 mm | 50 – 220 |
| Hopper wall thickness | 6 mm | 3 – 12 |
| Shaft diameter | 22 mm | 12 – 40 |
| Blade diameter | 70 mm | 40 – 120 |
| Blade thickness | 10 mm | 4 – 20 |
| Number of blades | 6 mm | 2 – 12 |
| Tooth notch width | 18 mm | 8 – 30 |
| Tooth notch depth | 15 mm | 5 – 30 |
| Counter blade height | 30 mm | 15 – 60 |
| Counter blade thickness Y | 24 mm | 12 – 40 |
| Frame width X | 240 mm | 150 – 360 |
| Frame depth Y | 160 mm | 120 – 260 |
| Frame height Z | 70 mm | 40 – 140 |
| Leg cross-section | 20 mm | 10 – 40 |
| Top plate thickness | 10 mm | 5 – 20 |
| Gearbox width X | 92 mm | 60 – 150 |
| Gearbox depth Y | 100 mm | 60 – 160 |
| Gearbox height Z | 100 mm | 60 – 160 |
| Motor diameter | 80 mm | 40 – 140 |
| Motor length | 140 mm | 60 – 260 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled