Everything else
Simple Drone Plane with Servo and Wire Cavities
- Bounding box
- 179.5 × 300.0 × 128.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
I want a simlpe drone plane, i want it with respect to servos and electric wires that will fit inside, and when i print it itt will fly
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage length | 150 mm | 100 – 300 |
| Fuselage width | 50 mm | 30 – 100 |
| Fuselage height | 50 mm | 30 – 100 |
| Main wing span | 300 mm | 150 – 500 |
| Main wing chord | 60 mm | 30 – 120 |
| Main wing thickness | 4 mm | 2 – 10 |
| Horizontal stabilizer span | 100 mm | 50 – 200 |
| Horizontal stabilizer chord | 25 mm | 15 – 50 |
| Horizontal stabilizer thickness | 3 mm | 2 – 8 |
| Vertical stabilizer height | 50 mm | 30 – 100 |
| Vertical stabilizer length | 25 mm | 15 – 60 |
| Vertical stabilizer thickness | 3 mm | 2 – 8 |
| Propeller diameter | 80 mm | 40 – 160 |
| Propeller hub diameter | 16 mm | 8 – 30 |
| Propeller hub length | 10 mm | 5 – 30 |
| Propeller blade chord | 14 mm | 5 – 30 |
| Propeller blade thickness | 2 mm | 1 – 6 |
| Propeller mount diameter | 6 mm | 3 – 20 |
| Front wheel diameter | 20 mm | 10 – 50 |
| Rear wheel diameter | 20 mm | 10 – 50 |
| Wheel thickness | 4 mm | 2 – 10 |
| Gear strut diameter | 3 mm | 2 – 10 |
| Landing gear height | 30 mm | 15 – 80 |
| Front wheel track width | 30 mm | 10 – 80 |
| Servo pocket length | 23 mm | 15 – 40 |
| Servo pocket width | 12 mm | 8 – 20 |
| Servo pocket depth | 10 mm | 5 – 20 |
| Servo center distance from nose | 45 mm | 15 – 70 |
| Servo left/right separation | 26 mm | 15 – 50 |
| Servo wire hole diameter | 3 mm | 1 – 8 |
| Longitudinal wire channel diameter | 3 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm