Everything else
Shower Arm Extension G1/2 (no hex)
- Bounding box
- 27.0 × 27.0 × 169 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
the hole in the wall should be on the opposite end of the tube.
Parameters
| Name | Value | Range |
|---|---|---|
| Extension length | 150 mm | 60 – 250 |
| Tube outer diameter | 22 mm | 16 – 32 |
| Tube wall thickness | 3 mm | 2 – 6 |
| G1/2 major diameter | 20.96 mm | 20.5 – 21.5 |
| G1/2 thread pitch | 1.81 mm | 1.2 – 2.2 |
| Thread length | 12 mm | 8 – 22 |
| Wall thickness around the female thread | 3 mm | 2 – 8 |
| Collar height above the bed | 13 mm | 8 – 30 |
| Hole diameter | 2 mm | 1 – 5 |
| Hole centre above the inlet shoulder | 10 mm | 3 – 40 |
| Tilt from radial, towards the outlet | 30 deg | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm