Brackets and mounts
Shot Cup & Sharpie Holder
- Bounding box
- 183.0 × 89.5 × 117.9 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design a disposable shot cup holder that also holds sharpies. There should be two cylinders cut from the top to the bottom with an even curve all the way around. The inner diameter of the cylinders should be 2.25in, wall thickness of .4mm at the top and 1.6mm at the base, rounded all the way around, the cylinders should be 3.5in at their tallest point. In between the two cylinders should be solid with two holes extruded cut into it, one on top of the other both at a 45° angle, the holes should be 53mm deep, 13.25mm in diameter, and a square off the circle being cut of 4mm
Parameters
| Name | Value | Range |
|---|---|---|
| Cup Inner Radius | 28.58 mm | 10 – 50 |
| Cup Height | 88.9 mm | 50 – 150 |
| Wall Thickness at Top | 0.4 mm | 0.2 – 2 |
| Wall Thickness at Base | 1.6 mm | 0.5 – 5 |
| Sharpie Hole Diameter | 13.25 mm | 5 – 20 |
| Sharpie Hole Depth | 53 mm | 30 – 80 |
| Sharpie Hole Angle | 45 deg | 30 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent