Sheet Metal Shelf Bracket with Electronics Enclosure

1 views

Bounding box: 1521.0 × 300.0 × 285.0 mm
Engine: Precision B-rep
Parameters: 17
Published: September 1, 2026

Download

Free to download and use. See the terms.

The prompt

我有一个支架，上面有两根相距三英尺（中心间距）的槽钢向上伸出。我需要建造一个货架，用三角形支架将它固定在这些槽钢上，所有部件均为钣金件。还应有钣金外壳，盖子作为独立部件通过铰链连接到外壳上，可以用螺栓固定在货架上，每排三个。外壳将容纳电子设备，因此应具有适当的通风设计和用于风扇的孔图案。假设内部电子设备将占用大约10英寸x8英寸的空间，包括风扇在内的堆叠需要5英寸的垂直空间。

Parameters

Name	Value	Range
Bracket Leg Length	150 mm	50 – 300
Bracket Width	40 mm	20 – 100
Sheet Thickness	2 mm	1 – 5
Bracket Mounting Hole Dia	6 mm	3 – 12
Shelf Length	914 mm	500 – 1200
Shelf Width	300 mm	100 – 500
Shelf Thickness	3 mm	1 – 6
Enclosure Length	254 mm	100 – 400
Enclosure Width	203 mm	100 – 300
Enclosure Height	127 mm	50 – 200
Enclosure Wall Thickness	2 mm	1 – 4
Fan Hole Diameter	80 mm	40 – 120
Fan Hole Count	2	1 – 4
Vent Slot Width	4 mm	2 – 10
Vent Slot Length	30 mm	10 – 80
Hinge Count	2	1 – 4
Hinge Screw Dia	3 mm	2 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS