Everything else
SG90 Pan-Tilt Bracket
- Bounding box
- 60 × 40 × 70.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 36
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
pan and tilt for two sg90 microservos.
Parameters
| Name | Value | Range |
|---|---|---|
| Servo body width | 23 mm | 20 – 26 |
| Servo body depth | 12.5 mm | 10 – 16 |
| Servo body height | 22.5 mm | 20 – 26 |
| Servo mounting hole spacing | 27.5 mm | 25 – 30 |
| Servo mounting screw hole diameter | 2.2 mm | 2 – 3.5 |
| Servo shaft clearance | 6 mm | 4 – 8 |
| Base width | 50 mm | 30 – 80 |
| Base depth | 40 mm | 30 – 70 |
| Base height | 26.5 mm | 20 – 40 |
| Base top plate thickness | 4 mm | 2 – 8 |
| Base corner fillet | 3 mm | 0 – 8 |
| Base mounting hole diameter | 3.4 mm | 2.5 – 5 |
| Base mounting hole inset | 6 mm | 3 – 12 |
| Pan hub recess diameter | 20 mm | 12 – 30 |
| Pan hub recess depth | 1 mm | 0.5 – 3 |
| Pan platform width | 44 mm | 30 – 70 |
| Pan platform depth | 36 mm | 25 – 60 |
| Pan platform thickness | 3.5 mm | 2 – 6 |
| Pan hub outer diameter | 19.4 mm | 12 – 28 |
| Pan hub screw clearance | 6 mm | 3 – 10 |
| Pan hub overlap into base | 0.5 mm | 0 – 1 |
| Tilt tower X position | 14 mm | 8 – 20 |
| Tilt tower thickness | 4 mm | 2 – 8 |
| Tilt tower width | 34 mm | 24 – 50 |
| Tilt tower height | 36 mm | 20 – 60 |
| Tilt axis height | 52.5 mm | 30 – 90 |
| Tilt plate width | 36 mm | 20 – 60 |
| Tilt plate height | 36 mm | 20 – 60 |
| Tilt plate thickness | 3 mm | 2 – 6 |
| Tilt hub outer diameter | 16 mm | 10 – 24 |
| Tilt hub screw hole diameter | 6 mm | 3 – 10 |
| Tilt hub overlap into tower | 0.5 mm | 0 – 1 |
| Payload shelf width | 30 mm | 15 – 50 |
| Payload shelf depth | 16 mm | 8 – 30 |
| Payload shelf thickness | 3 mm | 2 – 6 |
| Shelf offset below tilt axis | 15 mm | 5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
